LCD Projectors for Sale

LCD Projectors for Sale
By Ken Marlborough

Do you want to continue to be at the cutting edge of technology with high-end presentation products? Do you want to keep your audience glued to you and the vibrant graphics and clear characters of your presentation? Whether you are presenting to 10 or 10,000 people, there is bound to be an LCD projector that is perfect for you. Here is a simple guide on what to look for when you want to purchase one.

Resolution

The first consideration to look for when shopping for an LCD projector is resolution. Resolution is the number of light dots (called pixels) per square inch of the image produced. The higher the number of the pixels, the clearer and tighter your image will be. Also, if your LCD projector of choice is high in resolution, the image you can broadcast can be expanded to greater degrees. If your lecture or presentation is heavy on graphics and high quality color, or if you need to present to a large crowd, then you will need an LCD projector with high resolution.

Brightness

Since the image your LCD projector will broadcast is projected with a high-powered light bulb, you will also want to consider how bright a projection you will need. Again, the brighter the image you project, the farther away it can be seen. This is an important consideration for people thinking of presenting to large and small groups.

Price and other considerations

These projectors do not come cheap, so price is a major consideration. If your company is small, a desktop projector with resolution the size of your typical computer monitor should suffice. Also, be sure to check on compatibility issues. Is the projector you want compatible with your hardware? If it is not, you may wind up with a very expensive lamp. Finally, ask about user support. Does it come with a warranty? If it does, how long is the coverage? Is there a technical support hotline you can call if you have trouble with your projector? All these things will factor into getting an LCD projector that suits your needs.

LCD Projectors provides detailed information on LCD Projectors, LCD Projector Rentals, LCD Projector Lamps, LCD Video Projectors and more. LCD Projectors is affiliated with Cheap LCD TVs.

Article Source: http://EzineArticles.com/?expert=KenMarlborough
http://EzineArticles.com/?LCD-Projectors-for-Sale&id=405806

Choosing a Digital Projector

Choosing a Digital Projector
By Luke Kent

There are tons of digital projectors available and they are constantly dropping in price. However, when choosing a projectorfor yourself or your school there are a few practical things you should remember.

When choosing a projector you need to consider under whatcircumstances will you be presenting slide shows. The strength ofa projector's brightness is measured in units called lumens. Projectors range between 650-5000 lumens. The higher the lumensthe brighter the projector. Projectors that are less than 1000 lumens may not be great in a room with a lot of ambient light.For a classroom you should consider buying a projector with greater than 1000 lumens. If the projector will be used forlarger presentations, for 100 or more people, a projector withgreater than 3000 lumens may be needed.

A great accessory to your projector is a wireless mouse. Thesehave dropped considerably in price and allow the educator toface their audience when presenting the slide show. Whenchoosing a wireless mouse choose one that has a long rangeso that you can walk around when presenting.

Many projectors also come with remotes that help the presentermake adjustments to the slide shows quickly during the presentationwithout having to fiddle with the projector.

Remember when buying a projector analyze you needs first. You maynot need to spend as much as you think or you may need to spendthe extra cash to get a projector that suits your needs.

For more product reviews and teaching tips visit our site below.

Mr. L. Kent is an experienced educator and the lead consultant of http://MrKent.Net - Education Technology Made Simple. Feel free to visit the site and/or subscribe to our fantastic monthly newsletter at http://mrkent.net/php/?p=subscribe .

Luke Kent provides assistance to other educators by offering his interesting seminar, Teaching with Technology: A Fun Workshop for Technology Challenged Teachers. To book a seminar or a consultation visit http://MrKent.Net .

Article Source: http://EzineArticles.com/?expert=LukeKent
http://EzineArticles.com/?Choosing-a-Digital-Projector&id=368724

Choosing A Conference Room Projector

Choosing A Conference Room Projector
By Jim Gelder

When it comes to choosing a conference room projector, you probably want to run and hide! Thats because most of us dont know much about projectors to begin with and dont know the first thing about how to select one thats appropriate for a conference roomor any room for that matter.

Thankfully, theres the Internet. Within minutes, you can have all the information on choosing a conference room projector that you could ever want.

Sorting through all that information, though, can seem overwhelming. So its good to have some questions in mind as you do the research necessary to find the perfect projector for your conference room.

Some questions you want to ask are:

How difficult is operating the projector?
Is the projector portable or will it need to have a permanent mounting? Which type fits my conference room needs best?
What types of presentations will the projector be used for?
How much does the projector cost?
Does that cost fit my for buying a new conference room projector?
Is there a service contract available for the projector?
What is the repair policy for the projector?
Is the company Im thinking of buying the projector from a reputable and reliable one?
Will the projector require any special maintenance or periodic service checks?
Are any special supplies needed for the projector?
Is the size appropriate for the conference room?
If its portable, how much does it weigh?
Should I rent, lease, or buy?
Is the quality of the brightness satisfactory for the size of my conference room?
Do I need to save the receipt so that I can take the purchase off on my taxes?

These are just a few questions to help you on your way to purchasing (or leasing) a conference room projector. Just remember that cost does not always indicate quality. You can buy a wildly expensive projector that is all wrong for your needs. The opposite is true too: you can get a great projector that fits your needs for a moderate, or even small, investment.

The trick is in researching projectors and taking the time to read some consumer reviews that are easily found on the web. Before you do anything, though, have a budget in mind and have some idea of what youll be using your projector for. This will help guide your research and make it go more quicklyand be much more effective to boot!

Jim Gelder is a contributing writer for http://www.projectorian.com a website dedicated to offering information about projectors, projector rentals and also features a listing of local projector rental companies

Article Source: http://EzineArticles.com/?expert=JimGelder
http://EzineArticles.com/?Choosing-A-Conference-Room-Projector&id=113105

Tips on Comparing Prices on Projectors

Tips on Comparing Prices on Projectors
By Jim Gelder

Buying a projector is an investment that you want to be sure you make wisely. So taking the time to do some comparison shopping when it comes to prices is simply a smart thing to do and something you certainly wont regret.

There are several ways you can go about comparing prices on projectors. The first is to visit electronics stores and office supply stores that sell projectors and check out their prices in the stores. This is an especially good method during sales. Its also a great way to get a good deal locally because many stores will offer to beat their competitors best price by a certain percentage, which can save you even more money.

You can also research and compare prices on projectors online. Doing your projector price comparison shopping online makes it possible for you to check out a much larger number of prices on projectors than you can do by going from store to store. This will also make it possible for you to check out the prices on a wider number of brand name projectors and even look into the prices of used projectors. Online auction sites such as eBay are great places to compare prices on used projectors.

Consumer report magazines are also a good resource for comparing prices on various projectors. These reports have the advantage of also rating the projectors, so you can compare quality as well as prices on projectors.

This is an important part of comparing prices on anything, whether its projectors or cars. You want to get the most value for your money, and that means that many times a medium priced item is actually a better value than a higher priced one because it has more features than a stripped down top brand name one has.

Also, even before you start comparing prices on projectors, its a good idea to have a budget in mind for what youre willing to spend for your projector. This will help you focus your price comparison, although you dont want to rule out looking into projectors that may cost more than youve budgeted for because you may run into an unexpected bargain as you do your research.

And if the thought of doing all the research needed to compare prices on projectors sounds like work to you, remember that at least half the fun of making any purchase is in the search! Make a game of it and see just how great a projector you can find for the least amount of money, thanks to your savvy comparison shopping. Then take those savings and splurge on something just for you!

Jim Gelder is a contributing writer for projectorian.com a website dedicated to offering information about projectors and projector rentals and also features a listing of local companies that offer LCD projector rentals, New York projector rentals and more.

Article Source: http://EzineArticles.com/?expert=JimGelder
http://EzineArticles.com/?Tips-on-Comparing-Prices-on-Projectors&id=141959

Computer Projector Rentals

Computer Projector Rentals
By Eric Morris

Computer projectors have become indispensable for company presentations. The audio-visual impact alone really drives a difficult point home.

Most computer renting companies also provide computer projectors. However renting a computer projector can be complex as projectors are custom-designed for different operating systems and even processors. Before renting, a company will ask what computer will be used: iMac computers use different types of projectors than IBM. The resolution and the video card of the computer also matter in the final output on the projector.

Another factor is the room size and lighting. Rooms that cannot be darkened would preferably need a LCD screen. LCD screen would also Plasma monitors would suffice if the assembly will be small. The size of the monitor would also depend on the size of the room and how far the people are going to sit from the display. Sound quality is also affected by the size of the room.

Before renting a projector, inform the renting company whether videos are to be shown or just slides and transparencies.

Computer projector renting companies usually setup the entire audio-visual equipment when a rental order is placed. Get the whole thing checked, for video and sound quality. Also try out the projector before hand, especially if there are laptops to be used. The renting company also undertakes the dismantling of the unit after the program is completed.

Renting companies allow their projectors to travel with the business if necessary. For portable projectors, insist on a case to pack the equipment. Also the projector itself should be lightweight, not weighing more than 10 pounds.

Costs of renting computer projectors are tax deductible if they are used for business. Companies may pay for them using checks or their company credit card.

Computer Rentals provides detailed information about computer rentals, laptop computer rentals, computer projector rentals, desktop computer rentals and more. Computer Rentals is the sister site of Nature Screensavers.

Article Source: http://EzineArticles.com/?expert=EricMorris
http://EzineArticles.com/?Computer-Projector-Rentals&id=138443

Understanding Native Resolution For Your Home Theater Projector

Understanding Native Resolution For Your Home Theater Projector
By Semore Bernstein

What is Native Resolution for your Home Theater Projector?

To understand what is native resolution, lets start with an understanding of the concept of 'resolution'. Resolution is concerned with the mapping of the information within a picture or image by the dot area.

The smaller the dots, and the more densely packed it is, the greater the resolution, since the mapping of dots as measured in pixels constitutes the data for reproducing the images in video outputs of home theater and other viewing systems. This data processing capability of the projector, as measured in pixels, is what constitutes native resolution.

For high definition home theater projector pictures with good resolution, both the native resolution of the projector should match the resolution of the video signal or video input, failing which, distortion of the images is likely. Native resolution of home theater projectors is measured in two dimension figures with current capabilities ranging from (640480, 800600, 1024768, 16001200) for 4:3 image aspect ratios and the occasional odd resolutions like 12801024.

Thus, if projectors of 1280X 1024 native resolution were to map a video signal of resolution 1024 X 768, there would errors and likely distortion in the image. To effectively combat or otherwise provide for different standards, most home theater video projectors come with capabilities of multiple resolution standards, though it is most likely to be multiples of the lower resolution values.

Advice on Home Theater Projectors
Advice on Home Theater Projector Displays
Advice on Home Theater Projector Mounts

Article Source: http://EzineArticles.com/?expert=SemoreBernstein
http://EzineArticles.com/?Understanding-Native-Resolution-For-Your-Home-Theater-Projector&id=308155

Choose the Correct Home Theater Projector

Choose the Correct Home Theater Projector
By Steve Faber

How to Pick the Correct Projector for Your Home Theater

You're finally making the jump to the holy grail of home theater video displays; the front projection system. There's nothing else that delivers that really big, impressive video image like a front projection system. It's how you get that real cinema experience in your home theater. Home theater projector prices have plummeted in recent years, and the size of the units have shrunk right along with the prices. No more do have to live with a coffin sized box on your ceiling. As sizes have decreased, the image quality and brightness have actually improved dramatically. You'll notice image quality and brightness are two separate issues.

How do choose the correct home theater projector for your application from the myriad of projectors on the market today? There are so many different units, each with their strengths and weaknesses. First of all, there are two main projection technology categories, analog and digital. Analog projectors are based on CRTs, a mature technology that's been around for decades. Those are the projectors with the separate red, green and blue picture tubes and three lenses on the front. The other projectors use one of the newer digital technologies. These projectors have a single lens on the front. There are three major types of digital projectors on the market today; LCD (Liquid Crystal Display), DLP (Digital Light Processing) and LCOS (Liquid Crystal On Silicon). Each type of digital projector has it's advantages too.

You need to evaluate your specific requirements in order to make the proper decision. First of all, look at the room. Is it a dedicated home theater or a multi use room? Do you have complete control of the light? What aesthetic concerns are you dealing with? What is your projector budget? How large of an image do you want? Do you watch primarily DVD movies, TV movies, sports, or other TV programming? What specific source components will you be using with your projector now or in the future? Is picture quality the most important thing, or are other concerns, such as noise, size or brightness more important? Are you installing the projector yourself, or are you hiring a custom installer to do the installation for you? Where must the projector be placed? Can you get the required video and control cables to that location? These questions must be answered to ensure you get the proper projector for your home theater. If you are using a custom installer, they will take into account these factors and specify the appropriate unit for you.

Dramatic improvements in the picture quality of digital projectors notwithstanding, CRT projectors still deliver the most film like image. They have no pixel structure and deliver rich, deep blacks. Properly set up and calibrated, with a good video processor, and with the proper size screen, a CRT projector will deliver simply stunning picture quality. You'll need to use a good quality projection screen, typically with 1.3 2.5 gain depending upon the size, viewing angel and ambient light in the room. Prices on really great CRT projectors have fallen like a rock in the last year or two. You can get a 9 CRT projector that used to cost $35,000 to $50,000, for less than a third of that figure now. Many firms no longer make CRT projectors due to the decreased demand for projectors using this technology. In addition, the required video processors have decreased dramatically as well. Ten years ago a great video processor used to cost $10,000 to $20,000. Now you can get one for well under $5,000 and as little as $2,000, brand new. They also easily last 8,000 10,000 hours when properly set up.

If they are so fantastic, why doesn't everybody still use CRT projectors? Well, there are many detriments to a CRT projector as well. The best ones, with the 9 tubes, are simply huge. It's like hanging an upside down bathtub on your ceiling. If you want to put one under a coffee table, it'll be one large table. They are also very heavy, around 150 200lbs, so you need the proper structure to support them. CRT projectors also require precise placement. They must be perfectly square with the screen, at the correct elevation for good picture quality. In addition, while many digital projectors have zoom lenses, allowing the projector to be placed at a range of distance from the screen, CRT projectors must be at a very precise distance for a specific screen size. These factors severely limit placement options. While the larger CRT projectors put out more light than their smaller counterparts, they have pretty dim images compared to even the least expensive digital projectors. Finally, CRT projectors require specialized setup in order to get a watchable, much less an optimum image. Every 6 months to a year, they must be re-calibrated to ensure you are still getting optimum picture quality.

There are some very good reasons why most people are using digital projectors in their home theaters today. Many are small and light, require minimal setup and calibration (compared to a CRT), are quiet and have a bright, sharp image. But, there are many different digital projectors, ranging in price from around $700.00 to over $100,000.00. Which one is the best for your specific application? Thankfully, the situation is changing, but many of the digital projectors marketed for home theater use are really just re-badged presentation units. Presentation projectors sacrifice good video quality for brightness. Brightness is much more important when giving a Powerpoint presentation in a lit room than the correct color palate or the black level. The red on the pie chart looks great, no matter what, as long as you can see it from the back row.

You want to choose one of the newer units that has been truly designed for home theater applications. The actual technology used for the imaging chip is not all that important, there are great examples using all three of the digital technologies. Companies such as Sony, Runco, InFocus, Vidikron, Marantz, Benq, Panasonic, Sharp, Optima and Sanyo and some others all make great home theater projectors. The projector will have great black levels, to accurately reproduce detail in the darker areas of the picture and give great contrast. Absolute brightness is not extremely important, unless you have a multi-use room without complete light control or you have a lot of people over for sporting events. If you are entertaining many people for sports, it's nice to have some light on in the room, so a brighter projector is advantageous.

Projectors come in a number of different resolutions. The lower the resolution, the smaller the screen you can use before you can see pixel structure. Also, the lower resolutions will not support true HDTV. Most will display HD, but at a decreased resolution. The lowest end projectors typically have resolutions of 800 x 600. The Texas Instruments Matterhorn chip is popular on budget priced wide screen projectors, and has a resolution of 1024 x 576. Anything over a resolution of 720 will allow for true HDTV. The TI series of HD-2 DLP chips has a resolution of 1280 x 720. In April of 2005, TI announced new DLP chips with 1920 x 1080 was ready for production, allowing for true 1080p resolutions. Projectors with this chip will begin shipping in Q1 of 2006. Blu-Ray Disc has stated they will support 1080p, so by late 2006 there will be commercially available 1080p content besides Microsoft's WMHD discs.

Another very important aspect of home theater projectors is the internal video processing. This is one of the primary differences between good home theater projectors and presentation projectors. Digital projectors must display progressive scan images at the native resolution of the chip, so any interlaced signal, such as 1080i HDTV, must be de-interlaced and then scaled to the native chip resolution. Poor quality video processors, weather in the projector or external units, cause all sorts of video artifacts that can get in the way of a satisfying video presentation. This subject alone is too in depth for this article, as entire texts have been written on the subject. However, one common video artifact is jaggies where diagonal lines are jagged instead of straight. Another annoying artifact caused by poor video processing is moire'. This is a pattern seen as alternating light and dark lines that change position as the image moves.

You'll want to be sure your projector supports the HDMI or DVI with HDCP copy protection to allow you to connect a HD-DVD, scaling DVD player or Blu-Ray Disc player. These devices will only allow maximum resolution on a display that has a digital video input with HDCP copy protection. In the future, cable TV and satellite providers may restrict the maximum resolution to their digital outputs too.

When choosing your new home theater projector, make sure it has the video quality, brightness, size, auditory and budget characteristics that you need. Projectors are a large investment, choose carefully and you will be rewarded with years of thrilling video in your home theater.

Steve has 15 yrs in custom electronics. He is a CEDIA certified designer with ISF and THX certificates. His experience includes: installer and programmer; system designer; business unit director for an a/v importer; sales rep for a CE distributor; and principal of a $1.5M+ CEDIA firm. He's now senior sales engineer for Digital Cinema Design in Redmond, WA. Get more great home theater and home automation information here:Home Theater Projectors

Article Source: http://EzineArticles.com/?expert=SteveFaber
http://EzineArticles.com/?Choose-the-Correct-Home-Theater-Projector&id=149412

Understanding Projector Screens: Be Careful You May End Up With TOO Bright An Image!

Understanding Projector Screens: Be Careful, You May End Up With TOO Bright An Image!
By Andrew Ghigo

Today's compact yet powerful front video projectors may leave you with a too bright an image to watch! This being especially so if you intend to watch a projected image in a darkened room which after all, is most often the case with a home theater setup.

Defining Screen Gain

Prior to proceeding with our discussion, it is important that one has a full understanding of what the term screen gain is all about.

It may sound strange that we talk about gain when in reality a projector screen is nothing more than a passive device. Yet there is - it is all a question of how the screen surface distributes the reflected light.

Screen gain is a measurement of the reflectivity of the screen surface. It measures the ability of the screen to direct incident light back to the audience.

The gain number represents the ratio between incident light and reflected light. A flat matte white surface has a gain of approximately 1. A gray screen has a gain less than 1 and therefore, it attenuates incident light. Reflective screen surfaces have gains greater than 1; these projection screens direct more incident light back to the audience.

Gain is always measured in front and perpendicular to the screen at the point of maximum brightness; this represents peak screen gain and occurs at the zero viewing angle perpendicular to the screen surface.

For a screen with gain greater than one, the gain drops as one moves to the side and view the screen at an angle to the perpendicular drawn from the center of the screen. The angle at which screen gain falls to half the peak is referred to as half gain viewing angle. A person viewing the screen from this angle will see the image half as bright as the person seated at the center. The more one moves further away from the center, the dimmer the projected image will be.

The higher the peak screen gain, the narrower the supported viewing angle. This is the price one has to pay for a higher screen gain - the higher projector screen gain at the center is in fact achieved by directing more light towards the center viewing positions rather than allowing for a uniform reflected light over a wider angle of view.

Projected Image Brightness:

Matching the projection screen gain with the ambient light and the video projector output is essential if you want to ensure that you will end up with a correct level of projected image brightness.

This is an extremely important issue. Do not forget that a basic requirement for a great movie experience is a comfortable environment. This means that the time one spends watching a movie should be as comfortable as possible. Exposure to a bright projected image is uncomfortable on the eyes - even when this is for just a few minutes, least imagine when watching a two-hour movie.

A Tricky Matching Process!

Ambient Light Conditions, Image Brightness & Screen Gain

A projected image is at its best when viewed in total darkness - this helps take away any visual distractions - rendering it easier for the viewer to get deeper immersed into the movie action.

In the home, achieving a completely darkened room is almost impossible except in the case of the dedicated home theater setup. The amount of ambient light present has an impact on the resultant projected image contrast. This calls for the need to increase the image brightness to maintain the correct level of image contrast.

The tricky issue is to arrive at the correct level of image brightness for a pre-set level of ambient light. This in view that projected image brightness is a function not only of the projector output, but also of the screen gain, and image size.

The explanation that follows should help you get a better understanding of the relationship that exists between these three inter-related parameters.

Display Brightness and Screen Gain

The brightness output level of your projector is a measure of the projector output power in terms of light intensity. Please keep in mind however that the resultant projected image brightness is a different issue. Image brightness falls in proportion to the area of the projected image size - the bigger the projected image is, the dimmer it will look for a fixed level of projector brightness.

The projected image brightness - more specifically the Luminance level for a projected image, is a measure of the light reflected from the projector screen area. It is measured in foot-Lamberts, and is defined as:

ANSI-lumens of your projector divided by the square footage of Screen.

(Note that one foot-Lambert is equal to 1 ANSI lumen per square foot.)

To arrive at the actual level of light reflected from the screen surface, the above result must be multiplied by the projector screen gain.

A useful reference here is what has been defined as 'sufficient brightness' by the Society of Motion Pictures and Television Engineers, also known as SMPTE.

In standard 196M, the SMPTE determined sufficient brightness for showing motion pictures in a darkened room using a unity gain matte white projector screen, as 12 - 22 foot-Lamberts. In practice, the luminance target level is set to about 16 foot-Lamberts, while the average bright scene brightness level in a movie theater is typically 60% to 75% of this target value.

Display brightness is in itself an entirely subjective term; whats more, it is all relative to the amount of ambient light falling on the screen surface.

The following rules of thumb would surely come to assistance in this respect:

The contrast ratio between the projected image and the ambient light level falling on the screen should be at least 5:1. This is necessary for the eye to perceive a real impression of brightness. If this contrast ratio is not achieved, the projected image will not be considered of adequate brightness level.

When viewing takes place under normal ambient light conditions, the luminance level should be close to 50 foot-Lamberts. This level of luminance is derived from the fact that SMPTE indicated a target level of image brightness for a CRT TV as 50 foot-Lamberts, this in view that a TV is normally viewed under normal ambient light. One may argue that TV is a totally different technology this is true, but this target level for image brightness or luminance, still holds good for most circumstances.

How does all this translate in practical terms?

If one is viewing an image in typical very low ambient light conditions (say less than 2 foot-candles - equivalent to approximately 22 Lux), then the minimum required light level illuminating the screen surface should be around 10 foot-candles to achieve sufficient image contrast.

For a matte white projector screen surface with a screen gain of one, this translates to a minimum of 10 foot-Lamberts in terms of light reflected from the screen for image brightness. This is close to the SMPTE typical requirement for average luminance when viewing pictures in a darkened room.

Similarly, if viewing were to take place under normal ambient light room conditions (typically 10 foot-candles or 110 Lux), applying our first rule of thumb to achieve the required contrast level would result in a luminance level of 50 foot-Lamberts (approx. 540 Lux) for the same matte white projector screen surface. This is also in line with the target luminance level detailed in rule 2 for viewing under normal ambient light conditions.

Note:

• Light illuminating a surface is measured in lux (Lx = lumens/m2), or foot-candles.
• Light reflected from an area (luminance) is measured in candelas/m2 (cd/m2) or foot-lamberts (fL).

Now, lets consider as an example what will happen with different projector screen gains for say a given 1000 ANSI-Lumens projector and a 100 diagonal screen size.

Projector Screen Gain 1 1.5 2Image Luminance in foot-Lamberts304560

It is clear that our 1000 ANSI-Lumens projector would produce a too bright an image when the latter is viewed in a darkened room, even when using a standard matte white projector screen with unity gain. Similarly, use of this projector in conjunction with a projector screen surface having a gain of 2 may result in a too bright an image even when viewing takes place under normal ambient light conditions.

Andrew Ghigo A Telecoms/Electronics engineer by profession, with specialization in digital switching and telecoms fraud management systems.

Editor and publisher of http://www.practical-home-theater-guide.com - a site dedicated to all home theater enthusiasts with the scope of serving as a comprehensive home theater guide to home theater systems, product reviews and home theater design.

This article is an excerpt from a series of guides appearing under thehome theater screens section of the site.

Article Source: http://EzineArticles.com/?expert=AndrewGhigo
http://EzineArticles.com/?Understanding-Projector-Screens:-Be-Careful,-You-May-End-Up-With-TOO-Bright-An-Image!&id=40540